🎨 Chris Gehringer  母带响度插件 Make Believe Studios CGII MAC

“我想发布一款能帮助工程师在现代环境中完成母带处理的工具。所以，我们创造了我的插件 CGII，它既能帮你提升响度达到大声轨，又能同时增添个性色彩。

我们未来的目标就是打造我一直渴望用来做出惊艳母带的工具——那些当今音乐必不可少的利器。”

🎯 Make it Good & Loud（又好又响）

用 CGII 让母带变响，同时不损失原始混音的清晰度、密度和重量感。即使你手里的混音已经很响了，也能给它再加一点料，不会引入恼人的失真，也不会压平素材、吸干低频的生命力。与此同时，你还能控制节目的真峰值电平，确保没有 intersample overs（采样间过冲）。

（Make it Good & Loud: use CGII to make your masters loud without losing the clarity, density and heft of the original mix; control the true-peak level to ensure no inter-sample overs）

📦 我们还内置了 dither（抖动降噪）、DC-block filter（直流阻断滤波器）和完整的 LUFS/True Peak 计量，让你可以把 CGII 放在母带链末端，一站式搞定最终处理。

（dither, a DC-block filter and complete LUFS/True Peak metering so you can place CGII at the end of your master chain as a one-stop shop for final processing）

🔧 虽然 CGII 最初的设计目标是又好又响，但你会发现它在混音和处理链的各个位置都表现惊艳。

  • 🔊 用 Loudness processor（响度处理器）激发谐波
  • 🌀 用 Density processor（密度处理器）提升 bloom（泛开感/延展感）和弱电平清晰度，不影响瞬态
  • ⚡ 或者干脆把极度透明的 true-peak lookahead limiter（真峰值前瞻限制器）放到任何你需要的地方
CGll , CG2

“I wanted to release something that would help engineers master in todays modern environment. So with that being said, we’ve created my plug-in (CGII) which helps you gain level to loud tracks and simultaneously add character.

Make it Good & Loud

Use CGII to make your masters loud without losing the clarity, density and heft of the original mix. Even if you are working with a mix that is already loud, you can give it a little extra, without adding unpleasant distortion and without flattening out the material and sucking the life out of the low end. At the same time you can control the true-peak level of the program to ensure that there are no inter-sample overs.

​

We’ve also included dither, a DC-block filter and complete LUFS/True Peak metering so that you can place CGII at the end of your master chain as a one-stop shop for final processing.

While CGII’s original spec was to make things good & loud simultaneously, you will find that it is wonderful in a variety places in your mixing and processing chain.

Use the Loudness processor to excite harmonics. Use the Density processor to bring up the bloom and raise low-level clarity without affecting transients. Or simply put the incredibly transparent true-peak lookahead limit any place you need it.

声明：本站部分资源采集于互联网，版权属原著所有。如有侵权请联系我们进行下架处理，敬请谅解。任何个人或组织，在未征得本站同意时，禁止复制、盗用、采集、发布本站内容到任何网站等各类媒体平台。